Miniature Doll Book Making - Tutorial

In my recent Doll House project I made some little books.

I promised to make a tutorial and here it is!

I made these three books and some little flower

cards.  Small details like these can add a lot

to a Doll's room. The flower cards I just glued 

to a second sheet of paper and cut them out.

For the book, you need a picture of a book cover.

There are lots of free images for books like this.

I just did a search for "Free dollhouse book cover".

I increased the size of the image to suit my 9" dolls.

I printed the image on regular print paper.

Trim the image but leave some extra!

Trim the corners out.

Leave folds on all four sides.

You will need thin cardboard.

Cereal boxes and tissue boxes work great!

Cut out 2 cardboard pieces, slightly smaller than the front and back

images. Cut a third for the spine.

You want the image to fold over all the edges, 

so no white paper shows on the cover.

I always use a glue stick for paper projects.

Liquid glues make the paper wrinkle.

Carefully glue the cardboard to the back of

the book cover.

Leave some space between the cardboard pieces.

This will allow your book cover to fold.

Glue the flaps down on all 4 sides.

(my glue goes on purple!)

Notice how the pink cover is visible on this side!

This makes certain your book cover image 

looks right, with no white showing.

 Here is the cover all glued and ready for pages.

For the inner pages, use a full sheet of paper.

Accordion fold your paper the width of your book cover.

Some people use a piece of styrofoam instead

of paper pages.  You could also use

thick pieces of cardboard glued together.

I personally like seeing the paper pages.

 You should end up with this.

Lay your paper inside your book to

measure the length you need.

Remember, the pages should be slightly 

smaller than your cover.

Cut the folded paper into pieces to 

fit inside your book.

Stack them up and check if they are thick enough

to fill the spine of your book.

Keep in mind that these are books for looks only!

It doesn't matter if they have normal opening pages!

Next I use Tacky glue to glue

the pages to the spine.

Tacky glue is stronger and dries 

faster than Elmer's glue.

I add an extra dab of glue on both ends as well.

Let the glue fully dry making sure the pages 

are all in contact with the spine.

Let it all dry and your book is done!